Kickstarter coming soon…

Kickstarter campaign coming soon

With the new inclusion of Australia on Kickstarter, I thought it an opportunity not to be missed. I’ll be offering the published game in 3 player, 4 player and 6 players sets, plus some fun extras.

When kickstarter is launched in the very, very near future I will have some limited special editions/pledges – and I want you guys to get them! All I need from you is your email so I can let you know the details and the start date of the campaign.

On top of this I am looking into making some more maps, so I’m going to count votes for requested areas. (The emails I collect will only be used for Kickstarter)

Kickstarter Alert

Your Email (required)

Map Votes so far:

Location/Country Votes
US 33
Australia 20
Canada 13
Sweden 9
South Africa 3

Testing maps and boards in strategy games

Major map update

Caribbean Map for download - Sovereign Board Game

Well it has been a very long time since I updated… what can you say stuff happens. I have been working on a map of the Caribbean though. Why the Caribbean? Well it was for testing ultimately. The board we have been playing has mostly been Europe, and this has proved quite a lot of fun, but that board had shown certain parts of the game to be less useful.

Ships head from the central islands towards the Venezuela coast

Ships head from the central islands towards the Venezuela coast

Most of the land is connected, and the shape of the land is such that the fastest way to move around the board is on land. The down side of this is that players tend to shy away from ship building. So to make sure that this part of the game works well I designed the Caribbean map. The main differences are the map is much larger,  21 land maps instead of 12. However many of these maps do not have anywhere near the amount of land on them. So effectively there is just more space filled with water. Water then becomes the most effective way to move around.

Designing a balanced board or map for strategy games

There are many things in board design that can effect play and the Europe board was changed countless times to help balance the game. I have talked about this in previous posts, but in summary, a players’ position should not determine the outcome of the game.

Building cities amongst mountains has defensive value but this comes at a cost

Building cities amongst mountains has defensive value but this comes at a cost

The board should be balanced in way that strong defensive locations are either low on resources or expensive to build on. While you don’t want a completely balanced board, and it would never happen unless every tile was the same, you want to make sure that the advantages of a location are equaled by the disadvantages. The main reason you don’t want a perfectly balanced board is you need the variation, this allows players to take different approaches to playing the game dependent on where they are.

Why test different boards and maps for your strategy game

The player in the Amazon is only in contact in one near the Andes

The player in the Amazon (purple) is only in contact in one near the Andes (Yellow)

The benefit of testing these two maps is that now I can compare the play styles. The Caribbean map has somewhat spread the distance between players allowing limited contact with all players (except their direct neighbors) unless they build boats. Having a military victory is much harder as a result. The new map has helped us address some the issues related to military victories and battles. In turn we have made some major changes to attaining a military victory and I will update the rules next week. Keen players have also occupied the large number of islands in the centre of the board leaving them slightly exposed, but this has also allowed them access almost any player.

Conflict between players was limited to neighbours

Conflict between players was limited to direct neighbours, especially while units could not travel far

They can effectively pick the weakest one from this vantage point. For these players certain technologies also hold more value than others, for example ships are much more useful than railroad. Another change is the geography, a large desert in the north west corner and jungle and rivers in the south east encourage players to build cities in the most economic fashion, rather than the most defensive.

Playing only the Europe map would never have changed play styles to such a degree. The new map also removed the players’ ability to pick key locations on the map, knowledge that had built up over several games. This really leveled the playing field again. On top of which players had a new map to play on, and the change was fun. A new world to conquer, so to speak – sorry 🙁

Building a strategy game that works on any board or map

Part of the game design is to make a game system that can work on any map, custom maps included (coming soon). So far the game system is working well for both maps. I feel they are significantly different to push the game rules, but in time more maps will tell me if that’s true.

So please enjoy the map of the Caribbean and feel free to download it for your own game.

Encouraging player interaction in games

Players build around the fringes of their territory while trying not to get too close to other players for fear of attacks.

Players build around the fringes of their territory, while trying not to get too close to other players for fear of attack.

Players surprised me during a recent game. As one of them hit the lead, the other players co-operated with each other in an effort to stop that player. I must say that it was not my intention to make the rules play out this way, but instead, to create a more open game where player progress was easily identifiable. In saying that, it has effectively encouraged more player interaction. I felt this inadvertently reflected a real-world scenario, as players were put in a position where they had to compete, or they would lose the game. Some players, however, could do little because of their distance from the winning player, or their lack of resources. It played out really well and it created a spectacular and speedy end. Nothing promotes interactivity between competitors like a common enemy.

Players sacrificed their own lead to work together and hold the winning player back. Each player worked only as hard as they had to, so that they would not affect their ability to win. This created an interesting scenario as it became a race towards the end. Players were feverishly counting the number of turns it would take to win the game. At the same time, they tried to stall other players just enough to stay ahead.

The game certainly played out with the three stages I was after.  1. An easy building stage where people built up empires and strategically staked out territory. 2. A middle stage where players are more cautious, and their strategies are well thought out, (while keeping a close eye on other players). 3. The last stage; a mad rush to the finish, where players are counting every action carefully and using bonuses they’ve collected to gain advantage, and ultimately, try and win.

Let’s look at how this was achieved:

Defensive strategy: to cordon an area (England) off for later in the game

A defensive strategy. The purple player has cordoned England off for later in the game, when space becomes an issue.

Early part of the game: To make players build an empire and think strategically, there had to be limited space. A smaller board space and limited resources at the beginning meant players needed to concentrate on creating a territory.  Good players laid their cities in a way that was easy to defend, or provided land for later in the game. Players found it difficult to attack early on as the distance between players made it hard to surprise anyone. Players had plenty of time to build up defences while an enemy army approached. Players who did not spend at least some time building defences early on in the game found themselves weaker in the middle part of the game. Players had to allocate resources evenly between their own strategy, while defending themselves against other players’ strategies. How well one plays this stage could potentially affect the remainder of their game.


Midway through the game the board gets full

Midway through the game the board is starting to get crowded and players need for space is encouraging interaction. I would like to test smaller board arrangements to encourage more interaction earlier.

The mid-section of the game: Players could now see the other players strategies start to take shape, and build themselves up to counteract them. Any player trying to stop another player would be reducing their chance of winning.  This meant players had to be very calculating when making their decisions. With only a limited number of actions, it severely restricted players from getting ahead too quickly.  Balance was everything. Players could spend all actions in their turn when expanding, but then they may have found they lacked the technology and armies to defend themselves. Players also may have spent all their action points on technology, without enough city tiles to be able to buy more technology or build the newly discovered units.

The final part of the game: Players could not win by surprise, as you could only collect one victory card per turn (this rule has been changed now, but a similar condition is now in place). Players could clearly see opponent progress, so they always had time to intervene. The limited actions per turn restricted players from suddenly building numerous armies or discovering a complete row of technologies. This has greatly increased creative playing styles and caused the players to calculate very carefully.

Game-play Phases:

In the end I was very happy with the pace of the game. Play at the beginning of the game is now easier, allowing players to concentrate on their own moves and ‘warm up’ their minds. The middle phase is more calculating, and tends to play a bit slower because there are many options to consider. It is also still possible to change strategies during this part of the game without affecting players chances too much. The final phase is usually over in two to four turns, and is highly stressful for the player. Hopefully this leaves them with a bit of a ‘game high’. I always find myself rapidly going over some ‘what if’ scenarios, then I try to remember them for the next game session. 🙂

Sovereign launch day a success

Sovereign Board Game Launch

My brother and Jeff discussing tactics, that's me in the back

Well the 29th has been and gone, and the day worked out quite well. It was probably more of a thank you to everyone involved over the past year than a game launch, but it was great to watch a few first time players experience the game as well. Everyone decided to pair up and play, which created a slightly longer game, but it was fantastic to hear everyone discussing tactics. I managed to wrangle a large format print of the board! It was nice to play on a high gloss board without seams.

I did find the board a little too large, but I suspected as much from a previous game I had played with my brother (a 2 person game). I will write more in an upcoming post about this issue.

Pete and James making a strategic move!

Pete and James making a strategic move!

There was some really good discussion afterward, and I now have some great ideas for future versions, and tweaks to the game. I’m going to savor these ideas for later posts, so stay tuned.

I also plan to add plenty more content for downloading and customisation in the next 2 weeks.

Thank you again to everyone who could make it. I hope you enjoyed the game, and of course, don’t forget to download the game when you get a chance.

Launch day for Sovereign

Sovereign - an opensource board gameHi everyone, this is a quick post to say that I have set a launch day for the board game. I have been working pretty hard to get as much content ready as possible, and this has kept me quite busy. This is why there has been a lack of posts since August. I will be uploading a range of game packs so players can get started straight away. However to maintain the open source theme all the original artwork, rules and instructions on how to modify will be up there too. I play tested the rules extensively in order to have a good base for everyone to work from, and I am going to try my hardest to not feel precious about anything. If people think it doesn’t work – it goes!

Launch day is 29th January. I might upload some sneak peaks before then so keep watching.

Sovereign will be available online
29th Jan

Making Board Game Pieces

Making your wooden game board pieces

Making your wooden game board pieces.

This is just a quick post about making board game pieces.  A word of warning, when making wooden pieces, hexagons are hard to make. Luckily I have a father who is a carpenter, and because I certainly did not inherit his ability to work with wood, it was very helpful.  We eventually did make quite a few pieces, but it required plenty of heavy equipment.  That equipment made light work of what would have been a very slow process manually, and if I ever need to make more, it will be quite easy now that we know how.

How to cut your own board game pieces

First we worked out the height and width; 20mm and 17mm, and about a metre long Then we cut and planed the timber to size (planing gives timber a smooth edge).  With a circular saw we ran the lengths along an angled blade to create the first side, then rotated until all the sides were done (four in total).  The 17mm width needs no further changes, but the 20mm side is altered.  Dad made sure the angled sides were 17.5mm apart, so that we had and extra 0.5mm, or 0.25mm for each side.  This way, we could run it through the planer and get a nice smooth finish.  Then we just sliced it up, like a carrot, 10mm thick. (All the credit goes to my dad, thanks!)

I thought this diagram might shed more light on my description.

Cutting hexagon board game pieces out of wood

How to cut your hexagon board game pieces out of wood.

I then sanded back each piece, yes each piece, until they were nice and smooth on the flat sides, and I had removed most of the splintered edges. There are about four hundred pieces all up.

Painting the home-made board game pieces

The emblem on the home made wooden game board pieces

The emblem on the wooden game board pieces. They stack nicely, which will work well for armies.

I had two ideas; staining the pieces and using six kinds of wood, or painting the pieces.  Since we only had three kinds of wood at the time of cutting, painting was the option I chose. Painting them was easy if I just wanted them plain, but I wanted some pieces that could be distinguished from others.  I thought of a variety of ideas, but some were impossible (or at least very difficult), and as these are just trial pieces I didn’t want to get too far into the process.

Painting home made wooden board game pieces

Painting home-made wooden board game pieces. It was fairly easy and the paint dried quickly.

I found a hole punch in the shape of the Sovereign emblem (fleur de lis) and cut out some sticker paper into those shapes. Then I painted one side in a contrasting colour to the final colour, generally ‘slate grey’.  When that paint was dry, I stuck the sticker over the top, and then painted the end colour over the top of that.  The end result, once the sticker was pulled off,  left the emblem in the slate grey. It was very fiddly, but it looked nice when the sticker came away clean.

Some things to note about making your own game board pieces out of wood

  1. The first thing I found was that hard wood, with a fine grain, is much much better.  The pine was rough, light and didn’t paint well.
  2. Make sure you have plenty of pieces to trial out your ideas for painting etc. although you can always paint over them.
  3. Make it easy to reproduce, if you are only making a few one offs that’s fine, but four hundred to six hundred pieces can take a while (I am still not finished).
  4. Think about the colours you use; high contrast is best.  The yellow I used does not stand out too well on the board.
  5. If you can buy them and they are not too expensive, it’s not a bad option.

I will write about a really successful test-play we did the other week soon.

Testing board games for balancing

We recently had another test of the board game. We attempted to play the game through, although we didn’t quite make it after seven hours of play.  We did get very close, however, so it did become obvious as to who was most likely to win.

What I was really hoping to check during the game was the balance of the unit strengths and weaknesses, and whether they were balanced against the cost, the game stage, and against other units.  The other part of our testing was the discovery tree.  There were a number of bonuses in there that had not been tested, and I felt we need to examine these as well.

Combat system testing

The city in the bottom left was taken more than 10 times during the game, most of the battles never needed a die.

The city in the bottom left was taken more than 10 times during the game, most of the battles never needed a die.

Combat is something that is hard to measure without solid play testing.  I have created a small program where you can check the numbers of each combat system.  I have tried a number of variations, but the format we went with was 1d6 + bonus.

The results were interesting, but not exactly what I was after.  Very quickly players would opt to build large armies that did not require a roll, ensuring victory, rather than taking any chances with rolling.  This demonstrated two issues; units were not balanced using the 1d6; and there was no real balance with shadow costs, as a player was not taking any risks for the gain of winning a battle.

Balancing with alternate game strategies in your board game

There needs to be an inherent risk involved with the war strategy, and an equivalent reward.  In the game, there are of course three winning strategies, and I would like to make each valid and worthwhile.  The game balance is heavily weighed towards expansion; war being the next best strategy, and then technology.  These need to be equal, and this test-play demonstrated it’s current flaws.

The blue player switched from technology to expansion later in the game and was unmolested due to their position on the map.

The blue player switched from technology to expansion later in the game and was unmolested due to their position on the map.

I have recoginsed some of the issues with the game. One player took the option of fighting everyone, and this stopped other players from continuing their strategy, as they needed to concentrate on their defence.  Another player took expansion as their approach, and they quickly exceeded other players in points as they researched many technologies, allowing them to catch up with players who had technology as their approach. Expansion is by far the best option, providing you are well placed on the map and not threatened by other players.

Since this test-play, I have given the issue some thought, and I am looking at finding a way to limit expansion as an option and make war and technology more appealing.

Technology also gained rewards which were too great.  Doubling of points was powerful, and allowed players to jump forward quite dramatically.  I think the technology tree can play an important part in balancing, and there are a few approaches I can take.  One is to make technology advantages dependent on other activities.  A particular form of technology could allow expansions of cities, but only cities greater than four or five.  This means the player who avoids expanding cities has a smaller reward from this technology.  This forces the player to think more carefully about their tactics long-term.

Allowing players to implement various strategies is proving to be a real hurdle, but I think it’s an important aspect to the games’ appeal.

Balancing resources on your playing board

Resources on the board were unbalanced; Spain was easily defended and had plenty of resources.

Resources on the board were unbalanced; Spain was easily defended and had plenty of resources.

Something that needs some work is resource distribution on the board, and it can really only be worked out through test-play, although a little logic always helps.  This was evident in the first test-play and I adjusted it marginally for the next one, however, as it turns out I needed to do more.  Spain was by far the strongest position, and Greece the weakest.  I have since improved resource placement and have tried to entice players to weaker positions for more points, and stronger positions for less points.  The logic here is obvious, but the idea is to have players make a tactical choice on their location based on these two qualities and their chosen playing style.  Always give your players ‘interesting choices’.

Combat testing program: testing battle odds

Game combat system testing

This post has evolved because I was tired of speculating about what may or may not happen in a battle, and I wanted to check out the odds you would get for each system we had discussed while game testing.  While I still think test-play is the best way to test out battles (especially because battles are always in the context of the game), this little program I wrote can help rule out quite a lot of bad combat systems for a game.  It will save you the trouble of testing them in the very valuable game testing time.

Combat system program: checking out the odds

This tester is built using flash, and you can do a number of configurations. It is, of course, not exhaustive as this would take far too much time to program. However, the main features are:

  1. set the number of die and sides per die – you can’t mix dice
  2. set the bonus per unit and number of units – the bonus will be added to each unit individually and totaled not to all units collectively
  3. set any other bonuses (blanket bonus) – this is applied only once to each roll – not per unit

The results are out of one hundred and will show you the number of successful attacks (offence); defends (defence); draws and the voids (rolls that can’t work or are faulty).  The last two numbers are the army bonuses for offence:defence. There is also data on the highest, lowest, and average roll attained.

The tick box will allow you to choose between a single roll scenario, where whoever wins kills all the opposing units, or the default (unticked) which will play battles out on a unit by unit basis.  So the trailing player loses one unit, and then they both roll again and again, until all units on one side are gone.  It will update the values each time a unit is lost.

You may also choose to have no units and just test the dice rolls.  Just put zeros in the other boxes.

Extensive testing of combat systems

I have been testing with this program now for a while and have found two combinations that will probably work well with the game.  Originally we used 1d6 plus the unit bonus, and this resulted in many battles that did not require any rolls.  The difference between armies was large enough to have a clear winner in many battles.

… we decided that the use of the 1d6 + the bonus value worked fine, as stated in the previous post about combat systems. However in the initial rules only one unit could attack one unit at a time. We decided to change it so the bonus could be compounded, so two units would add both bonuses together to increase the possible roll. (quoted from the previous post)

I examined the problems:

  1. players were not needing to roll because the bonuses on the armies were too big, and differences between them were greater than six – players took advantage of this game-play weakness and built big armies to guarantee a win
  2. armies in cities were limited in numbers, while armies outside of cities weren’t
  3. whole armies would be destroyed in a single battle/roll

To combat this I have made the following changes:

  1. rolls will include either an 1d12 or 2d6 (I have yet to test this in game-play, but I am leaning towards 1d12)
  2. the size of an army will be limited by the largest city controlled by that player (this will balance out the city based versus non-city based armies)
  3. battles will destroy one unit at a time, as opposed to an entire army being destroyed in one go (I am not sure if this will work as it may slow down the game.  I guess we’ll just have to test it!)

The combat system for Sovereign has been quite difficult to get right, and there are many potential solutions.  I found some great answers on this forum at boardgame geek (Two armies face off – combat systems) – incidentally, I found this through Google analytics where they linked back to me!

Board game testing with multiple players

Initial multi-player test of Sovereign Light the board game

I finally managed to co-ordinate a test play for the new and simplified rules, dubbed Sovereign Light. I gathered five people together to play, and it was amazing to watch how different each player approached the game.  The main aim of this game was to play out some of the rules and identify dominant strategies in the game.  I was focusing on three possible winning scenarios; trying to make each of these strategies balanced. Each player took their own, varied approach and we were able to recognise which strategies were going to pay off long term.

Making your game appeal to a variety of player types

There are five winning conditions listed below, although we mainly focused our testing on the first three:

  1. Your civilization conquers all others
  2. You discover all the top tier technologies
  3. You receive 400 points a turn
  4. Your point rate is more than all other nations combined
  5. You are declared unbeatable by other players

The different winning scenarios exist in order to create variation in play, but more importantly, they make the game appeal to different player types.  The winning conditions appeal mostly to Achievers and Killers, although there is some room for ExplorersSocialisers will hopefully enjoy the act of playing a game in a group, especially since the game is aimed at 4-6 players. I am also thinking of introducing player cards that would list a nation, its leader, and some personality traits with advantages and disadvantages. This may add a role-playing element to the game, and potentially appeal to Socialisers even further.

With a focus on the first three possible winning scenarios, it became evident early on in the game that fast expansion of small cities was by far the dominant strategy. I tried to vary my approach by not picking optimum strategies in order to test the extent of the disadvantage.

Recessive strategies; adjusting the combat system in the board game

The one player who did take an aggressive approach found themselves at a disadvantage also. We had to modify the rules slightly as it became immediately obvious that attacks on cities needed to be improved. One change we made was to the combat system; we decided that the use of the 1d6 + the bonus value worked fine, as stated in the previous post about combat systems.  However, in the initial rules, only one unit could attack another unit at a time.  We decided to change it so that the bonus could be compounded, then two units would add both bonuses together to increase the possible roll.  This created an extra dynamic to attacking, and added an advantage to the combat approach to winning the game. It also allowed for army building, which adds some extra variety and strategy for the players.

This shows the first part of an attack using an army. They attacked with 3 horsemen against one warrior.

This shows the first part of an attack using an army. They attacked with three horsemen against one warrior.

Another change we made is as follows.  During an attack on a city, you can continue your attack move through the city so long as you don’t lose.  This allows you to capture an entire city in one move.  At this point we decided you could also split your army, by choosing to leave units in the captured ‘city tile’ and continuing with the rest of your army.  I have created a diagram that displays a move one of our players made.

This shows the second attack on the city, using only 2 horsemen and leaving one in the newly acquired tile.

This shows the second attack on the city, using only two horsemen and leaving one behind in the newly acquired tile.

Using three horsemen in an army, the player attacked with 1d6 +6, against one warrior with 1d6 +1 +1 (city bonus), and then two warriors with 1d6 +2 +1 (city bonus).

In the rules, only the army controlling the city gets the defensive city bonus.  I did this to help players defend their cities early on in the game, and prevent it from finishing too quickly.

Reducing the effectiveness of the dominant strategy

I had originally set up the costs of settlers who can build new cities somewhere between the first city expansion and the second. This (I hoped) would discourage single tiled cities.  This condition resulted in many cities of two tiles being built all over the board, which is fine, but it also means your points would increase very quickly with this method.  Players, as a result, were not really thinking or doing anything else, so there was very little player interaction, and the level of strategy involved in placing city tiles was severely limited.

Cities give native units a bonus to defence for all adjacent squares. This is not awarded to units who are cpaturing the city.

Cities give native units a bonus to defence for all adjacent squares. This is not awarded to units who are capturing the city.

After some debate, we found an approach which might reduce the effectiveness of this dominant strategy.  While we did not implement it in this game, the test playing allowed us to recognise a flaw in the costings of city expansion versus new cities.  We came up with a change where the defense of cities was affected by the layout and size of the city.  This made logical sense for real world scenarios as well, which in turn supported the players suspension of disbelief.

The change to the rules meant that cities were larger and stronger; two factors I was really hoping to encourage during the game.  Strategy was an important factor in the game also, and I really wanted players to have to think carefully about how and where they built their cities. Decisions made earlier in the game could now affect play much later down the track. A player’s skill and in-game experience now made more of a difference to their success in the game, creating more player satisfaction.

Our solution was one simple change; instead of a blanket +1, cities afforded a +1 for all adjacent city tiles (see diagram). This will hopefully encourage players to think carefully about their city location and layout, and placed shadow costs using only the highest point tiles.  The simplicity of this rule made is easy for the player to quantify their choices.  It is important for a player to be able to easily weigh up the odds when making decisions in a game.

Fairness in game-play

In order to make things fairer, I created one new rule before we played.  To prevent players from building single cities near enemies and making this a launching pad for large scale attacks, I restricted cities to only being able to produce as many units per turn as they were in tiles.  In other words, a single tile city could only produce one unit per turn, whereas a city of three could produce a maximum of three per turn.  Another constraint was that you could only have as many units in a city as it had tiles; this may work for combat as a winning strategy, but it needs some more testing.

Speeding up the game

There was a real need to speed up the movement, which we had learned from the testing.  Units moving faster meant that the combat would begin sooner, making combat a more valid approach to winning.  In the past, players avoided attacking in the early stages of the game because units took so long to reach an opponent, that the opponent had two or three turns to build up a defence. So I doubled all the movement rates of beginner units and added a few more movement points to the later units.  We did not progress far enough into the game to see the impact this had on the later stages of the game, but it certainly helped player interaction at the beginning.

Don’t bombard your player with trivial decisions

One small change (and I suspect there will be many more) was in the first tier of discoveries.  We had a free city expansion, which all players happened to pick as their first move. This was the best option for a player, and any player not taking this course of action would have been disadvanatged. If it is a trivial choice, then why bother the player with having to make the choice.  As a result, I have since moved the technology to the second tier to remove this temptation. It was important to address these kinds of problems and I will pay close attention to any similar issues.